维特拉耗材代用品选择（小结篇 2013年7月18日恢复附件）

liguang112410

帅帅小稻田

已经入了，这两天闲了好好研究下

邪恶天使

传动皮带的代用品是哪个牌子的，谢谢

果树林

今年满三年了，出4S，进单位制定修理厂了，必须好好研究一下了，谢谢！

翻番350

已经出保,非常感谢楼主

奔跑的揪片子

避震器有吗

东天山

06款1.6MT三门版维特拉高压点火线圈和国产铃木天语的线圈通用，价格便宜，我更换六个月未出现故障，这车离合器片买法雷奥的270元搞定，谢谢楼主分享经验。

dedededede

测试

KizVita

北美铃木GV统计的一些易耗品型号品牌等信息：

Bulbs Replacement Guide:
(source: Osram Sylvania)

Low Beam: H7
High Beam: 9005 (HB3)
Fog Lights: H11
Parking Lights: 2827
Front & Rear Turn Signals: 992
Tail Light & Stop Light: 7443
Backup Light: 7440
Map Light (Front Roof): 175
Dome Lights (Middle Roof & Rear Roof): 3175
High Mount Stop Light, License Plate & Trunk: 2825

Wheels:
Bolt Pattern: 5 x 4.5" (114.3 mm)
Lug Nuts and Locks Thread Size: 12 x 1.25

Camber Angle Adjustment Bolts (Front)(For Lifted GVs)
Part No.: 81250 (Pair - 2 Bolts)
Size: 12mm
* With 1 Bolt per Tire = ±2°
* With 2 Bolts per Tire = ±4°

Part No.: 81260 (Pair - 2 Bolts) [RECOMMENDED]
Size: 14mm
* With 1 Bolt per Tire = ±2°
* With 2 Bolts per Tire = ±4°

Note: It is recommended to measure the currently installed factory bolt before buying as some year and market models may not fit the 81260 bolts (like 2006's GV for US market). Make sure the metric grade of the bolt you're buying is 12.9 for added security, do not buy anything less than 8.8 grade. Use only one bolt (upper) per tire to adjust the camber angle, leaving the lower factory bolt, it is actually not needed to change the lower bolt for proper angle adjustment. Rear camber angle doesn't need any aftermarket bolts for its adjustment, it can be easily adjusted with factory bolts.

Door Speakers Size:
Front: 6.5"
Rear: 6.5"

Wiper Blades:
Front: 19"
Rear: 12"

MANUFACTURER'S RECOMMENDED:
(source: Suzuki Grand Vitara Owner's Manual)

Fluids:
Engine Oil: SAE 5W30
Automatic Transmission Fluid: SUZUKI ATF 3317 or Mobil ATF 3309
Brakes and Clutch: DOT3
Power Steering: ATF DEXRON -II (ESSO JWS 2326) or DEXRON -III, or equivalent.

Spark Plugs:
DENSO SK20PR11 or NGK IFR6J11 (RECOMMENDED)

Tire Size & Pressure:
Size: P225/70R16 or P225/65R17
Pressure:
Front: 32 psi
Rear: 32 psi
Spare: 32 psi

云中紫龙

最近买了博时的空滤，感觉质量很好，附图




[ 本帖最后由 云中紫龙 于 2014-6-18 11:41 编辑 ]

ylh998

好贴顶起好贴顶起好贴顶起好贴顶起好贴顶起

pilepala

必须顶起来！！！

兰溪123

这个帖子真好，非常感谢共享

自驾走四方

sgsuv2006

濂借创锛屾敹钘忎簡銆傝阿璋

sgsuv2006

维特拉车不错，帖子也很给力。同是乌鲁木齐的车友顶一个。

梦里蓝天夜未央

dedededede于 2009-12-17 17:24 发表在1 楼

维特拉耗材代用品选择（小结篇 2013年7月18日恢复附件）

    基于一段时间的寻找和试用，维特拉常用的耗材（机滤、空滤、空调滤）代用品基本有
了完美的选择，可以做一小结了。但这绝对不是终结，更多的耗材替代品肯定会被继续开发
或发现，我一人一车也没有可能一一试用，所以期望同学们能够提供使用经验，不断补充 ...

先顶5D版主！

我正准备入手大维，唯一顾虑的就是常用配件(机滤，空滤，空调滤，刹车片等)，现在终于找到您费心整理的这些资料，彻底坚定了选择大维的信心！非常感谢！

东东嘻嘻

这是被逼的呀，铃木啊值得反思。

dawnlion

大维班里的同学，唉，佩服ing。

昨夜我吃酒醉

学习